Cream of the Crop 1

home *** CD-ROM | disk | FTP | other *** search

/ Cream of the Crop 1 / Cream of the Crop 1.iso / BBS / VBBSA6_2.ARJ / VBBSDOOR.DOC < prev next >

Wrap

Text File | 1993-02-06 | 32KB | 889 lines

██┐ ██┐ ████████┐ ████████┐ ███████┐ ██│ ██│ └██┌──██│ └██┌──██│ ██┌────┘ ██┐ ██┌┘ ███████│ ███████│ ███████┐ ██┐██┌┘ ██┌──██│ ██┌──██│ └────██│ ███┌┘ ████████│ ████████│ ███████│ └──┘ └───────┘ └───────┘ └──────┘ * The Virtual BBS/NET Version 5.60 (C) Roland De Graaf 1990, 1991, 1992 4246 Elisabeth Ave. Holland, MI 49424 * ╔════════════════════════════════════════════════════════════════╗ ║ VBBS Doors Documentation ║ ╠════════════════════════════════════════════════════════════════╣ ║ Written By: Kevin Klunk, aka Lord Doomslayer 2@5081 VirtualNET ║ ║ Edited By: Thom Harris, aka Da'Chief 1@6171 VirtualNET ║ ║ Format By: Sam Fleming, aka O. F. 1@2056 VirtualNET ║ ╚════════════════════════════════════════════════════════════════╝ TABLE OF CONTENTS (1) General Information 1.1 - Dropfiles 1.2 - FOSSIL Drivers (2) Preparation, Installation, and Execution 2.1 - Game Files 2.2 - Batch Files 2.21 - Game Batch Files 2.22 - Maintenance Batch Files 2.3 - Interfacing with the BBS 2.31 - VBBS Door Configuration Menu 2.32 - Script Installation 2.33 - Function Block Installation (3) Programs and Utilities 3.1 - DoorWay 3.2 - DoorMaster 3.3 - VReturn/WWIVDoor 3.4 - Virtual ToolKit (4) Miscellaneous Information 4.1 - Enhancements 4.2 - Copyright Information & Distribution Sites 4.3 - Final Comments NOTE: The words DOOR and GAME are used interchangeably throughout this document. VBBS Doors Documentation -- 2 ╔════════════════════════════════════════════════════════════════╗ ║ (1) GENERAL INFORMATION ║ ╚════════════════════════════════════════════════════════════════╝ 1.1 - Dropfiles ═══════════════ Dropfiles (DF) are the link between the BBS and the game itself. A DF contains all of the required info for the game to operate properly. This includes the user's "handle" (so he al- ways uses the same slot in the game), the user's COM port & speed (so the game knows where to send the data), and other miscellan- eous info - the BBS name, sysop name, user's time remaining (on the BBS), etc. Here is a list of many of the common dropfile formats: Types Original BBS format VBBS Supported? ----------------- ---------------------- --------------- CALLINFO.BBS Wildcat! 2.x No CHAIN.TXT WWIV Yes DOOR.SYS Wildcat! 3.x & Others Yes DORINFOx.DEF QBBS / RBBS Yes PCBOARD.SYS PC Board No SFDOORS.DAT Spitfire No At the present time VBBS supports the CHAIN.TXT, DORINFOx.DEF and DOOR.SYS dropfiles. They are fairly simple to use; the only one needing an extended explanation is the DORINFOx.DEF. All the dropfiles are created in your \VBBS di- rectory. The 'x' in DORINFOx.DEF is the node number that the user is logged in on. On a single-line system this will always be a '1', the normal local node would be a '0', and node 2 would be a '2'. Many of the newer games that are coming out allow for multiple players in the game at the same time, and some even allow inter- action between the players. Almost all of these games require the DORINFOx.DEF dropfile. The DOOR.SYS dropfile is a fairly generic dropfile accessible to many games and is VERY common. It requires no special work to use with a game. The CHAIN.TXT dropfile is used predominantly by WWIV-based doors, and most can be used with VBBS (see section 3.3 for more information.) 1.2 - FOSSIL Drivers ════════════════════ FOSSIL drivers are external TSR's that handle carrier de- tection routines for programs that cannot do it themselves. You do not HAVE to use a FOSSIL driver for all games, so you do not have to load one at start-up (unless your modem configuration requires one.) Sometimes they are required if you are using a high-speed modem, but this DOES vary. VBBS Doors Documentation -- 3 The two most commonly used FOSSIL drivers are BNU and X00. Both allow installation before running a door and removal afterwards. See section 4.2 for information or where you can get these pro- grams. You will want to go through the documentation files on the FOSSIL driver for specific installation information, as the setup varies widely based on the hardware used. ╔════════════════════════════════════════════════════════════════╗ ║ (2) Preparation, Installation, and Execution ║ ╚════════════════════════════════════════════════════════════════╝ 2.1 - Game Files ════════════════ Installing the game onto your system is the first step to- wards getting it to work. The first thing you should do when you get a new game is unZIP/deARJ/unPAK/whatever the compressed file is into its own directory. Then load up your favorite text edi- tor/viewer and read the sysop documentation. Almost all ques- tions can be answered with the docs included with the games. While you are reading, take note of the following information: Installation - does this program self-install? - does this program need to be in a special directory to run? - does this program have a configuration file that needs to be made / altered? - how do you initialize the game files? Dropfiles - does it use one of the 3 supported by VBBS or does it require a special dropfile? FOSSIL Driver- Is one needed for this program to run? Command Line - Quite often there are MANY switches that can be used on the command line. Make SURE that you note ALL the possible switches. - Major switches to look for are: Dropfile Type Dropfile Path FOSSIL (Y/N) Node Number Info. Configuration Filename Local Play Mode Before you continue, make sure the game will support one of the three dropfiles that VBBS supports (either DOOR.SYS, DORINFOx.DEF, or CHAIN.TXT.) If it does not then there are two other ways you can get the game to run with your BBS. 1> Get a Door Converter program - these programs allow you to take a dropfile that you already have (ie DOOR.SYS) and run it through the converter to produce a different dropfile for- mat (see section 3.2 for more detailed information). 2> Some games allow you to create your own dropfile for use with the game. If it is possible to do so then all you need to do is write down the information that has to appear in the file and the order it must appear. You can then either write up a script or a batch file to create the new dropfile for the game. VBBS Doors Documentation -- 4 If neither of these options are available then place the game on a floppy for storage and check to see if any local (or network) sysops can give you a hand. The most important rule when setting up a game is 'Ask Lots Of Questions.' If you cannot find the an- swers in the docs, then you NEED to ask someone else. Do not give up on the game if it does not seem to work when it is first in- stalled, many games require a bit of fine-tuning to match your specific system setup. At this point run any installation program (if supplied) and fill in the required information. Remember to write down any information that the program gives you during the installation. Most doors require you to modify a configuration file. You can do this with your favorite text editor and make any changes re- quired. Note: Make a back-up copy of this file before you make the changes! These changes normally entail inserting your BBS's name, the sysop's name, any file paths that don't match the de- faults, etc. If the program allows multi-line use and requires a separate file for the configuration of each line, then make sure to make as many copies as you need (changing the filename) and then edit in the information that needs to be different between each configuration file. Once the program is installed, you should perform initial- ization of the game files (if that is required) before continuing on to the next step. This will allow you to immediately go into the game to see if you have everything set up properly. If the game has a 'LOCAL' mode, try to run it at this point. This will allow you to test for any bugs in the configuration as far as the game files are concerned. After the 'local' bugs are taken care of you will then want to move on to the next section. It is re- commended that you do not make the door open to all your users until you have had a friend (or fellow sysop) call from remote to test the modem end of it. 2.2 - Batch Files ═════════════════ The single most important part of getting a door to run is having the correct batch file setup. Not all games require a batch file to run, but we strongly recommend that you do use them for every door. It makes it easier to find problems, and allows far more versatility. You may also be required to create batch files for running the nightly maintenance for the game. Both files are covered here. 2.21 - Game Batch Files ─────────────────────── This is where the information you took down on the command line comes in handy. You need to determine what switches will be required, and you will also have to discern if you need more than one batch file. VBBS Doors Documentation -- 5 Here is an example batch file (most will be similar in format): DUMBGM.BAT Line 1-> @echo off Line 2-> c: Line 3-> cd c:\vbbs\games\dumbgame Line 4-> dumbgame /pc:\vbbs\ dumbgm1.cfg Line 5-> cd c:\vbbs Line 1 -> Not required, turns off screen output of the batch file. Note: If you are not using DOS 5.0 you cannot use the @ symbol (so the line would read 'echo off') Line 2/3->Just a precaution to make absolutely SURE you are on the correct drive and in the right directory. Not required, but a GOOD thing to do in ALL batch files. Line 4 -> Actual game command line. This game requires the program name followed by a '/p' and the path to your dropfile (which is ALWAYS the \VBBS directory.) and then the name of the configuration file it is going to use (if this game was run on node 2 the config file would be dumbgm2.cfg) Line 5 -> This is just another 'make sure' line to restore the system to the right directory. If you do NOT return to the \VBBS directory after running an external program you will have empty files and CONTROL.DAT files popping up all over your hard drive. These files are harmless and can be deleted, but they are a pain. While most batch files will contain more 'meat' they will usually follow the same basic structure. Again, refer to your sysop docs that came with the game for more detailed information. A final note on batch files. If a door requires a differ- ent command line when being run off of different nodes (hence multiple batch files) you should give the batch file a name of 1 to 7 characters followed by the number of the node that the batch file is for. The command to run the game would then be the file- name followed by a %1. For example, the command line 'C:\VBBS\DUMBGM%1' would run the files as follows: User on Node 0 --- Filename: DUMBGM0.BAT User on Node 1 --- Filename: DUMBGM1.BAT User on Node 4 --- Filename: DUMBGM4.BAT Some games that require you to use a FOSSIL driver and have a 'local' switch will require a different batch file for remote and local play. If a game does require a separate file for local play (and it does NOT use a dropfile to do so) you may NOT be VBBS Doors Documentation -- 6 able to do a <L>og-in Local from the WFC screen because the pro- gram will not detect a carrier and then exit. That style of game will require you to use the local node (Node 0) to play. 2.22 - Maintenance Batch Files ────────────────────────────── Some games require that you run a special program at the end of each day. These programs do things like updating high score files, maintenance on the game universe, and sometimes making backups of the data files. Any game that requires such maintenance will list the command line information in their re- spective doc files. All you need to do is create a batch file resembling your game batch file, except that it will contain the maintenance command line. At this point you have two ways to implement the nightly maintenance: either set it up as an indi- vidual nightly event or make a master batch file that runs all of your nightly maintenance at one time. No matter which way you choose to do it, you must first create the maintenance file. All you have to do is create a batch file following the same structure as your game batch, but using the command line that the game docs require for the main- tenance portion. If you are going to run each individually then you are done with file work at this point. If you wish to run all of your maintenance at once, then you should take all of your maintenance batch files and place them all into one BIG batch file. At this point you need to go to your \VBBS directory and run the VCONFIG program. Select option '8. Events Configuration' and you will be shown a screen like this: ## Time Last Run Command line A)dd Event E)dit Event Esc) Quit Select [A]dd Event and the cursor will be placed under the Time section of the first blank line. Enter the time that you wish to run the batch file and remember it is in Military Time (00:01 to 23:59.) The last run section should be left blank by just hit- ting [Enter] at this point. The command line is where you type the complete path and filename to the batch file you wish to run. If you are running each file individually you will need to add one new event for each file, although it is best to only use one large file for maintenance because each time it runs an event it has to reload the BBS and initialize the modem, which is just extra work for the system to do. If you have any questions on events then just see VBBS560.DOC - EVENTS Configuration for more information. VBBS Doors Documentation -- 7 2.3 - Interfacing with the BBS ══════════════════════════════ And now we get to the fun part -- actually installing the games into your BBS. There are 3 different ways you can load a door; from the VBBS door config, from a script, or from a func- tion block. Each has its own merits and each will be covered in turn. 2.31 - VBBS Door Configuration Menu ─────────────────────────────────── VBBS comes complete with a built-in door handling area. The door area places all the games in one section, allows you to place certain restrictions on access, and gives the option for using a credit system. It also offers the easiest setup of the three methods: Load up VCONFIG.EXE from the \VBBS directory. Enter the VCONFIG section 'A. Doors Configuration.' Select [F1] to add a 'New Game' line to the menu. Move the highlight bar over the 'New Game' line and hit [ENTER]. You will now see the following screen: 1. Program Name: New Game 2. Command Line: 3. Security Lvl: 255 4. Access Flag: 5. Single User: Yes 6. Credit Cost: 0 D)elete This Entry [ESC] to quit 1. Program Name: -> This is what the user will see when he enters your doors area. 2. Command Line: -> This is what you will use to run the game. If you are using a batch file, all you need to have is the COMPLETE path to the batch file and the batch filename (no extension). If the program has a different batch file for each NODE on your BBS then the batch file name would be listed like this: C:\VBBS\BATCH\DUMBGM%1 The %1 tells VBBS to place the node # at the end of the filename, thereby using the proper batch file for each node. 3. Security Lvl: -> This is the minimum security level (SL) nee- ded to play this game. It is set to 255 by default. You should leave it at that until VBBS Doors Documentation -- 8 you are ready to have it tried from remote. See VBBS560.DOC for more info on security levels. 4. Access Flag: -> This is the access flag required to play this game. NOTE: Access flags (also called "H flags") are the flags that are set in the user editor by pressing the [H] key. They are NOT the general flags. If this field is blank then anyone with the proper SL (or higher) can access this game. If this has a letter in it (and it can use from A to Z) then the user must ALSO have the flag ON (listed in his Uedit screen). This is use- ful for games that you only want certain people to have access to, including game edi- tors and such. See VBBS560.DOC for more info on access flags. 5. Single User: -> Set to YES if only one person can be playing at once, set to NO if it is a multi-player game. Most multi-player games require that DOS's SHARE is loaded into memory before they can be run. If this is the case you will need to add it to your AUTOEXEC.BAT file. 6. Credit Cost: -> This allows you to set an individual cost in credits per game. See VBBS560.DOC and VSCRIPT.DOC for more info on the credit sys- tem. 2.32 - Script Installation ────────────────────────── Script : Any program created using VBBS' script language. All scripts have the .V extension, are located in the script directory (see VBBS560.DOC - PATHS Configuration) and are compiled with VCOM.EXE (see VSCRIPT.DOC for more info.) Remember that any time you make changes to a script, you MUST recompile it. Installing in a script can be simple or complex, depending on the type of setup you would like to have. Due to space con- straints, only the actual running of a single door from within a script will be covered. For running more than one door, you would need a script for each door. *** Special Note *** Before you attempt to create the script you SHOULD read through the VSCRIPT.DOC to become familiar with the script commands. When setting up a door from within a script you need to decide how you would like to run, for lack of a better term, the 'loop stop'. When you exit a door that was loaded from a script, the system returns to the first line of the script, thereby creating an endless loop. To avoid this, you have one of two options: VBBS Doors Documentation -- 9 use either an $Extra variable or a $Flag. Both formats will be covered here. When using an $Extra variable: ------------------------------ DUMBGAME.V ---------- test $extra2 = DumbGame exitgame <--- This line tests to see if they just re- turned from the game. setextra 2 "DumbGame" <--- This sets the 'loop stop'. $gametoplay = "c:\vbbs\batch\dumbgm%1" <-These lines run the ac- tual door. door $gametoplay <-Remember that the %1 is the node number VBBS adds to the command line. If you do NOT need to have multiple batch files, then do not use the %1. # exitgame <--- These last lines turn $blnk = " " off the 'loop stop' setextra 2 $blnk so the user can play the game again. exit start <--- This is the line that sends the user back to the function block that he/she came from. When using a $Flag ------------------ $q = $flags instr N <--- These two lines do the same testval $q <> 0 exitgame thing that the 'test' line above does. setflags N on <--- This turns on the 'loop stop' $gametoplay = "c:\vbbs\batch\dumbgm%1" <--- as same commands above door $gametoplay <--- # exitgame setflags N off <--- Turns 'loop stop' off exit start <--- as same command above You will need to run VCOM to compile the scripts you have written into code that VBBS can use. You compile by using the command line VCOM <script name> while at the DOS prompt and in your scripts directory. If there are any errors it will let you know. The compiler aborts after the first error, so there may be more than one. Lastly, go into VBBS Doors Documentation -- 10 your function block (START.FB in the examples above) and add the following line on any but the first two lines in the .FB file: Z 001 2 Dumbgame | | | ^------This is the script name, NO extension | | ^----------This is the code to tell VBBS it is run- | | ning a script | ^-------------This is the SL to be able to use the key | (and run the script). ^----------------This is the key to press at the menu to load and run the script. 2.33 - Function Block Installation ────────────────────────────────── Function Block: File containing the commands for each menu of the BBS. All FB's have the extension .FB and are placed in the script directory (see VBBS560.DOC -- PATHS Configuration and VSCRIPT.DOC for more info.) All you need to do is select the function block that you wish to add the game to, pull up the .FB with your text editor and add the command using the following format. Note: Do NOT place this command on the 1st or 2nd line of the function block, as those are reserved for other info. Z 001 4 c:\vbbs\batch\dumbgm%1 | | | ^------This is the complete path to the batch file | | | and the filename to be run. | | ^----------This is the code to tell VBBS it is running a | | command that it needs to shrink the BBS out of | | memory for it to run. | ^-------------This is the SL to be able to use the key (and | run the door.) ^----------------This is the key to press at the menu to load and run the door. If you wish to create a separate function block just for games, then you will need to create a new set of menus for it as well as create the .FB file. For specific information read VSCRIPT.DOC and VBBS560.DOC. VBBS Doors Documentation -- 11 ╔════════════════════════════════════════════════════════════════╗ ║ (3) Programs and Utilities ║ ╚════════════════════════════════════════════════════════════════╝ 3.1 - DoorWay ═════════════ DoorWay is a program written by Marshall Dudley to assist in the setting up and running of almost ANY program through a modem. There are many different ways to use DoorWay, but the single most common use is to access the DOS prompt from a remote computer. Here is a simple setup for using DOORWAY.EXE for this purpose. NOTE: The DoorWay files come compressed and include the DOORWAY.DOC file explaining all the switches used. You will need to do some fine-tuning with ANY program that you set up using the DOORWAY.EXE, so keep a copy of the doc file handy!! 1> Get a copy of DoorWay v2.05 or higher and place the main executable file (DOORWAY.EXE) either in your path or directly into your \VBBS directory. (The latter is best, however.) 2> Load up your SYSOP.FB file and add the following command line to it: A 255 4 SHELL.BAT ^------------------Use any character not already in the SYSOP.FB. 3> In your \VBBS directory create this batch file: SHELL.BAT Line 1 -> @echo off Line 2 -> DOORWAY SYS /G:ON /V:B^U /M:1000 /B:MSZ /C:DOS The program has many useful applications, and can often make the difference in whether you can get a game to run on your BBS or not. Just remember, DoorWay allows ANY program to be run as a door; it does not have to be a program written specifically for a BBS. 3.2 - DoorMaster ════════════════ DoorMaster(DM) is a program written by Michael P. Otto to convert the various dropfile formats into any of the other for- mats. It supports the dropfiles created by 52 different software packages (see the DM docs for the actual listing.) Use of this program will allow you to use a game that requires a dropfile format that is not currently supported by VBBS directly (like WildCat 2.x's CALLINFO format.) You will need to read the docu- mentation for the actual command lines as the program has a very extensive set of commands available. VBBS Doors Documentation -- 12 3.3 - VReturn/WWIVDoor ══════════════════════ DOS Interrupts: Codes required by certain games to function. These games were written as WWIV doors and cannot be run on VBBS without a program called VRETURN (see below for more information on VRETURN). NOTE: This only applies to games that require the CHAIN.TXT dropfile to run. VBBS supports many common dropfile formats and almost all door programs give you options for the type dropfile to place in the configuration during setup or installation. VRETURN is a program used to intercept the calls to the DOS interrupts and allow the game to run without actually using the interrupts. VRETURN is available to any registered WWIV sysop, although there is a version that is not based on the WWIV code that is being written at this time (check any local Vir- tualNet BBS for information on this program). WWIVDoor is an accessory program to VRETURN that allows easier use of all WWIV-style doors. It automatically calls on VRETURN to handle the DOS interrupts and also handles any local logins to bypass the carrier detection phase of the game being used. WWIVDoor is written by Scott C. Duensing and includes all the general information you will need to run any of the various WWIV-style doors using this program. 3.4 - Virtual ToolKit ═════════════════════ The Virtual ToolKit is a programming assistant for use in the writing of single or multi-node games for use with VBBS. The ToolKit is presently available for VBBS-DOS and a special version will soon be available for use with VBBS-OS/2. There are very few games written specifically for OS/2, so this new VTK will open up some opportunities for all you game programmers out there. The VTK's are available only thru the VBBS author; please see the Registration Form for more info. VBBS Doors Documentation -- 13 ╔════════════════════════════════════════════════════════════════╗ ║ (4) Miscellaneous Information ║ ╚════════════════════════════════════════════════════════════════╝ 4.1 - Enhancements ══════════════════ There are many different scripts and source modifications written to improve the versatility of the on-line games area. The changes that are made with these 'programs' include multiple game topics, special restricted areas, and other visual changes and improvements. Other enhancements that you can use include modifying your batch files to create lists of games played. You can copy the games' high-score files into your text directory to create entire bulletin sections that are made up of your game scores. See VBBS560.DOC for more information on text sections. 4.2 - Copyright Information & Distribution Sites ════════════════════════════════════════════════ BNU FOSSIL Driver - Copyright (C) 1989; David Nugent and Unique Computing Pty Limited; Melbourne, Australia. - BNU is freeware and is available on many BBSes. X00 FOSSIL Driver - Copyright (c) 1990 by Raymond L. Gwinn 12469 Cavalier Drive, Woodbridge, Virginia 22192 All Rights Reserved - X00 is freeware and is available on many BBSes. DoorWay - (C)opyright 1987,1988,1989 Version 2.05 - 9-30-89 Written by: Marshall Dudley 406 Monitor Lane Knoxville, TN 37922 - DoorWay is shareware and is available on many BBSes as well as on the following official distribution BBS: Data World BBS - (615)966-3574 (Sean Dudley - Sysop) - Registration for DoorWay is $30 and is valid for all future releases of the software. DoorMaster - Copyright (C) 1988,89,90,91,92 by Michael P. Otto, All Rights Reserved 213 Casalon Drive, Suite 6 O'Fallon, MO 63366 United States of America - DoorMaster is shareware and is available on many BBSes as well as the following official distribution BBS: DataPoint BBS - (314)281-4707 - Registration for DoorMaster is $25 and is valid for VBBS Doors Documentation -- 14 all future releases of the software. WWIVDoor - Copyright 1992 Scott C. Duensing, All Rights Reserved. 312 Las Olas Drive Belleville, IL 62221 - WWIVDoor is freeware and is available on many BBSes as well as on the following official distribution BBS: Snafu Software BBS - (618)234-2631. ═════════════════════════════════════════════════════════════════ Well, that is all you should need to get almost ANY game up and running with VBBS. Almost ALL problems you will run into are either an error in a command line or a software/hardware in- compatibility (which are usually fixable with a FOSSIL driver). We can not say it often enough or loud enough -- ALWAYS READ THE DOCS!!! We all hate the time it takes, but it will save you LOTS of head- aches later on down the BBSing road. It is a good habit to have, and it pays out some serious dividends as well. ═════════════════════════════════════════════════════════════════